Breacher X1
The Breacher X1 is a special detonating device, to manually ignite a single HU-ignitor (Ignitor type IV), or of a Shock-Tube-Adapter for Hose-ignitions. This device has been specially developed to be used with ignition loads for tactical enterings (Explosive Breaching).
The Breacher is activated via an activator button and charges the internal capacitor within 30seconds. Ignition is then made by pressing both firing buttons.
As a power supply, three 3V CR123 batteries are used. Battery status, connectivity and the status of the Capacitor are displayed via three LEDs. A movable cover protects against unwanted activation of the buttons.
| Measurements: | 210 x 65 x 55 mm |
| Weight: | 300g |
| Case: | Plastic case |
| Power supply: | 3x 3V CR123 (Standard) 1x 7.4V LiPo-Battery (optional) 2x 9V-Block-Battery (optional) |
| Usage period: | About 120 ignitions (at 3x 3V CR123 min. 1.400mAh) |
| Temperature range: | -25°C to +60°C |
| Channels: | 1 Channel |
| Ignition voltage: | 700V / 110uF (26,95Ws) |
| Maximum ignitors: | 1 HU-ignitor (1Ω), oder 1x Shock-Tube-Adapter |
Aktuelle Software und Bedienungsanleitung zu diesem Produkt:
